Velocity Edge GX440 Guía de usuario Pagina 77

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 412
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 76
LAN/Wi-Fi Configuration
Rev 1 Oct.13 77
By default, the port is set to work as a virtual Ethernet port.
Note: Sierra Wireless recommends that you use a USB 2.0 cable with your AirLink device
and connect directly to your computer for best throughput.
To change the USB port to allow virtual serial port communication:
1. In ACEmanager, go to LAN > USB, and choose USB Serial as the USB
Device Mode.
To disable the USB port, select Disable from the same menu.
Figure 4-6: ACEmanager: LAN > USB
Note: There are USB/net and USB/serial drivers available for Windows XP and Windows 7
32-bit with a separate pair of drivers for Windows 7 64-bit. USB/serial also works with Linux
CDC-ACM drivers.
Note: A reboot is required to activate the USB mode change.
Field Description
General
USB Device Mode *USBDEVICE=n
0 — USB Serial
1 — USBNET
2 — Disabled
This parameter alters the default startup data mode for the USB port.
Note: If you want to stream GPS data to the USB port (Local/Streaming on page 198), set
this field to USB Serial.
Vista de pagina 76
1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 411 412

Comentarios a estos manuales

Sin comentarios