Velocity Edge GX440 Guía de usuario Pagina 360
- Pagina / 412
- Tabla de contenidos
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
ALEOS 4.3.4 Software Configuration User Guide
360 4114514
If you use the command alone (without the “comma port identifier”) from any non-
serial terminal session (for example, telnet), the command takes effect on the
main port on the device.
Examples:
ATAIP=1 when executed in a terminal connected to the I/O X-Card serial port,
sets the Allow IP Address for the X-Card's serial port.
ATAIP=1,0 when executed in a terminal connected to the I/O X-Card serial port
sets the Allow IP Address for the serial port on the device port.
ATAIP=0,1 when executed in a terminal connected to the serial port on the device
sets the Allow IP Address for the X-Card's serial port.
ATAIP=0 when executed in a telnet session sets the Allow IP Address for the
device's serial port.
Table D-10: Serial AT Commands
Command Description
AIP Query or set the option to allow IP addresses to communicate on UDP over serial.
AT*AIP? to query
AT*AIP=n to set
• n=0 — Allow only the IP address specified in S53 to connect when UDP auto answer is
enabled (S82=2)
• n=1 — Allow any incoming IP address to connect when UDP auto answer is enabled
(S82=2)
Always subject to any security filters that may be defined. (See Security on page 344.)
\APPP Initiates a PPP connection on serial terminal.
You can also initiate a PPP connection using the ADT command and one of the supported
phone numbers.
Note: PPP is not available on the I/O X-Card serial port.
*CTSE Query or set asserting Clear To Send (CTS) when there is a network coverage.
AT*CTSE? to query
AT*CTSE=n to set
• n=0 — Disabled (Default)
• n=1 — Enable assertion of CTS when there is network coverage
DAE Query or set AT Escape Sequence detection.
ATDAE? to query
ATDAE=n to set
• n=0 — Enable
• n=1 — Disable (The escape sequence (+++) is ignored.)
*DPORT Query or set the device port that the device listens on for inbound packets/data/polls.
AT*DPORT? to query
AT*DPORT=n to set
• n=1–65535
- ALEOS 4.3.4 1
- Software Configuration 1
- User Guide 1
- 6 4114514 6
- Rev 1 Oct.13 7 7
- 8 4114514 8
- Rev 1 Oct.13 9 9
- 10 4114514 10
- Rev 1 Oct.13 11 11
- Contents 11
- 12 4114514 12
- 1: Introduction 13
- About Documentation 14
- Tools and Reference Documents 15
- 16 4114514 16
- 2: Device Configuration 17
- Main Menu Tabs 18
- Configuring 18
- Creating a Template 19
- Applying a Template 20
- AT Command Mode 22
- SSH PAD Mode 22
- Server Configuration 23
- 24 4114514 24
- 7. Click Apply 24
- Client Configuration 25
- 26 4114514 26
- 6. Click Add 26
- 7. Go to Connection > SSH 26
- Module Firmware 28
- Recommendations 31
- Enterprise LAN Management 37
- Compliant System 38
- 40 4114514 40
- 3: Status 41
- 42 4114514 42
- 44 4114514 44
- Rev 1 Oct.13 49 49
- LTE—Fallback to GSM/HSPA+ 53
- Rev 1 Oct.13 55 55
- Rev 1 Oct.13 57 57
- 58 4114514 58
- VPN connection has been made 58
- 60 4114514 60
- Rev 1 Oct.13 61 61
- Rev 1 Oct.13 65 65
- 66 4114514 66
- 4: LAN/Wi-Fi Configuration 67
- Private Mode 68
- Public Mode 69
- DHCP/Addressing 70
- Internal DHCP Server 73
- Ethernet 74
- Virtual Ethernet 80
- Virtual Serial 81
- Host Port Routing 84
- Access Point Mode 86
- Client Mode 90
- Both (AP + Client) Mode 92
- Global DNS 93
- LAN/Wi-Fi Configuration 97
- Rev 1 Oct.13 97 97
- 98 4114514 98
- 6. Select Broadband (PPPoE) 98
- Host Interface Watchdog 101
- 102 4114514 102
- 5: WAN/Cellular Configuration 103
- 106 4114514 106
- LTE—Fallback to EV-DO 111
- LTE—Fallback to HSPA+ 113
- Keepalive 116
- Data Usage Using Keepalive 116
- Re-Activation 118
- Backup APN 119
- Reliable Static Routing (RSR) 119
- 6: VPN Configuration 123
- Split Tunnel 124
- SSL Tunnel 129
- 130 4114514 130
- VPN Configuration 131
- Rev 1 Oct.13 131 131
- VPN 2 to VPN 5 132
- 7: Security Configuration 133
- Single port 134
- Range of ports 134
- Port Filtering—Inbound 139
- Port Filtering — Outbound 140
- Trusted IPs—Inbound (Friends) 140
- Security Configuration 141
- Rev 1 Oct.13 141 141
- LAN connected devices 141
- Trusted IPs—Outbound 142
- MAC Filtering 142
- Packet Inspection 143
- 144 4114514 144
- 8: Services Configuration 145
- ACEmanager 146
- Low Power 147
- 148 4114514 148
- Services Configuration 149
- Rev 1 Oct.13 149 149
- Dynamic DNS 151
- Third Party Services 153
- IP Manager 154
- Understanding Domain Names 155
- Dynamic Names 156
- WiFi Landing Page 157
- Password Only 158
- Control Only 159
- Gateway Only 161
- SMS Mode 162
- Sending an SMS Command 163
- Sending a gateway message 163
- Control and Gateway 164
- SMS Wakeup 168
- SMS Security 169
- 170 4114514 170
- Trusted Phone Number 171
- SMS Password Security 171
- SMS > Advanced 173
- Telnet/SSH 175
- Email (SMTP) 176
- Management (SNMP) 177
- 178 4114514 178
- • 1–65535 178
- • Default is 161 178
- Rev 1 Oct.13 179 179
- • Default is 162 179
- 180 4114514 180
- • 1 – 65535 180
- Time (SNTP) 182
- Device Status Screen 183
- 184 4114514 184
- 9: GPS Configuration 185
- Before Configuring GPS 186
- Servers 1 to 4 187
- 188 4114514 188
- Table 9-1: GPS: Servers 1–4 188
- • 1– 65535 188
- 192 4114514 192
- 194 4114514 194
- Redundant Servers 196
- GPS Configuration 197
- Rev 1 Oct.13 197 197
- Local/Streaming 198
- Local/Streaming—LATS 200
- • 0 = Disable (default) 201
- Rev 1 Oct.13 201 201
- Global Settings 204
- Introduction 207
- Configuration Overview 208
- Rev 1 Oct.13 209 209
- Action Description 213
- 214 4114514 214
- • SNMP Trap notification 214
- Email/SMS 216
- Report Groups 216
- Configure Events 219
- Events Protocol 220
- 11: Serial Configuration 221
- Port Configuration 222
- Reverse Telnet/SSH 224
- UDP Multiple Unicast 227
- Advanced 228
- Modbus Address List 234
- Advanced Settings 238
- TCP Settings 239
- UDP Settings 241
- 12: Application Configuration 243
- Application Configuration 245
- Rev 1 Oct.13 245 245
- Previous Day 246
- Previous Daily Usage 246
- Field Description 246
- ALEOS Application Framework 250
- Rev 1 Oct.13 251 251
- • Disable (default) 251
- • Enable 251
- 252 4114514 252
- 13: I/O Configuration 253
- Relay outputs 254
- AirLink GX Series device 254
- More information 254
- Current State 255
- Pulse Count 256
- Configuration 257
- Transformed Analog 258
- Step 2—Configure ACEmanager 259
- 260 4114514 260
- 14: Admin 261
- Radio Passthru 263
- Linux Syslog 265
- Installing a Device Driver 267
- Install the driver 268
- Rev 1 Oct.13 269 269
- 3. Click Add 269
- 5. Click Next 269
- 270 4114514 270
- 8. Click Next 270
- Rev 1 Oct.13 271 271
- 9. Select Selected Ports 271
- 11. Click Next 271
- Rev 1 Oct.13 273 273
- 14. Select the Modem tab 273
- Figure A-10: Device Manager 274
- Rev 1 Oct.13 275 275
- Connection 277
- Rev 1 Oct.13 279 279
- 4. Click Next 279
- Configure the DUN connection 280
- Figure A-20: DUN Properties 281
- Figure A-22: Networking 282
- Figure A-23: PPP Settings 282
- Rev 1 Oct.13 283 283
- 284 4114514 284
- 15. Click Advanced 284
- Connection settings 285
- Figure A-28: ACEview: Menu 286
- Windows DUN 287
- 288 4114514 288
- B: Modbus/BSAP Configuration 289
- Modbus TCP/IP 290
- Modbus on UDP 290
- Host for Modbus on UDP 291
- Modbus with UDP 292
- 294 4114514 294
- Protocol 295
- 296 4114514 296
- Rev 1 Oct.13 297 297
- 298 4114514 298
- Rev 1 Oct.13 299 299
- 300 4114514 300
- Rev 1 Oct.13 301 301
- 302 4114514 302
- Rev 1 Oct.13 303 303
- 304 4114514 304
- Rev 1 Oct.13 305 305
- 306 4114514 306
- Rev 1 Oct.13 307 307
- 308 4114514 308
- Rev 1 Oct.13 309 309
- 310 4114514 310
- Rev 1 Oct.13 311 311
- 312 4114514 312
- Rev 1 Oct.13 313 313
- 314 4114514 314
- Rev 1 Oct.13 315 315
- 316 4114514 316
- Rev 1 Oct.13 317 317
- 318 4114514 318
- Rev 1 Oct.13 319 319
- 320 4114514 320
- D: AT Commands 321
- Reference Tables 322
- Device Updates 323
- 324 4114514 324
- Rev 1 Oct.13 325 325
- 326 4114514 326
- Rev 1 Oct.13 327 327
- WAN/Cellular 328
- Rev 1 Oct.13 329 329
- 330 4114514 330
- Rev 1 Oct.13 331 331
- 332 4114514 332
- Rev 1 Oct.13 333 333
- LAN/WiFi 334
- Rev 1 Oct.13 335 335
- Rev 1 Oct.13 337 337
- 338 4114514 338
- Rev 1 Oct.13 339 339
- Table D-6: VPN Commands 339
- 340 4114514 340
- Rev 1 Oct.13 341 341
- 342 4114514 342
- Rev 1 Oct.13 343 343
- Security 344
- Services 345
- 346 4114514 346
- Rev 1 Oct.13 347 347
- 348 4114514 348
- Rev 1 Oct.13 349 349
- 350 4114514 350
- Rev 1 Oct.13 351 351
- 352 4114514 352
- Email (SMTP) Commands 352
- Time (SNTP) Commands 352
- Rev 1 Oct.13 353 353
- Table D-9: GPS AT Commands 353
- 354 4114514 354
- Rev 1 Oct.13 355 355
- 356 4114514 356
- Rev 1 Oct.13 357 357
- 358 4114514 358
- Rev 1 Oct.13 361 361
- 362 4114514 362
- Rev 1 Oct.13 363 363
- 364 4114514 364
- Rev 1 Oct.13 365 365
- Standard (Hayes) commands 366
- Rev 1 Oct.13 367 367
- 368 4114514 368
- Rev 1 Oct.13 369 369
- 370 4114514 370
- Rev 1 Oct.13 371 371
- Applications 372
- Rev 1 Oct.13 373 373
- 374 4114514 374
- Rev 1 Oct.13 375 375
- 376 4114514 376
- E: SMS Commands 377
- List of SMS Commands 378
- Rev 1 Oct.13 379 379
- 380 4114514 380
- ACEmanager Web UI 381
- Ethernet Ports 381
- LAN Networks 381
- Port Forwarding 382
- Error Reporting 384
- Connection not working 386
- FW version” 390
- Rev 1 Oct.13 393 393
- TCP Connections 394
- AirVantage Management Service 395
- LTE Networks 396
- SIM Card is Blocked 397
- Remote connections 398
- Radio Band Selection 398
- 400 4114514 400
- G: Glossary of Terms 401
- 402 4114514 402
- Rev 1 Oct.13 403 403
- 404 4114514 404
- Rev 1 Oct.13 405 405
- 406 4114514 406
- 410 4114514 410
Relacionado con productos y manuales para Barebones Pc / Estación De Trabajo Velocity Edge GX440
(400 paginas)© 2020, manymanuals.es. Todos los derechos reservados | 0.085 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales